Ultrasonido óptico de exploración oftálmica A / B portátil YSODU5
| Parametros del producto | |
| Marca: | YSENMED |
| MOQ: | 1 |
| Paquete: | Paquete de madera |
| Nave de: | Guangzhou |
| Tiempo de espera: | 1-3 días |
| Personalización: | Yes |
Ultrasonido óptico de exploración oftálmica A / B portátil
Features
Adopt ARM9 Embedded Control Systems, FPGA signal processing system and elaborate selected ultrasonic hardware system。.
10.4 inch high resolution LCD screen.
Menu operation Language: Chinese/English.
Double probe sockets.
A mode probe: 10MHz, imported probe with fixation light.
B mode probe: 10MHz, imported transducer.
Display mode: B, B/B, 4B, B/A, A.
Gains range: 0--120dB.
Dynamic range: 30-100dB, visual and adjustable.
Gray: 256.
Intelligent TGC adjustment: 8 segments.
Build-in D disk: 4GB, save mass data, images, reports, etc.
Report function: print screen, IOL report, case report with picture, etc.
A scan parameter:
Resolution: 0.01mm.
Gain adjustable: 0-120dB.
Measurement range: 12-43mm(1640m/s).
Accuracy: ±0.02mm.
Eye mode: normal/aphakia/dense cataract/PMMA, Acrylic & Silicon for Pseudo Phakic eyes.
Measuring Mode: Contact and Immersion, automatic and manual.
Measurement methods: A single-point measurement（under A mode）; five-point measurement（under A mode）.
Calculation: std. deviation, average, automatical measuring 8 groups and average, accompany waveform, results correctable.
IOL Formula: SRK-II, SRK-T, BINKHORST,HOLLADAY, HOFFER-Q, HAIGIS.
B scan parameter:
Scan mode: High accuracy stepping motor drive sector scan.
Scan Angle: 53°.
Display Depth: 0～56mm.
Gray: 256.
Depth seletion: 8.
Frame correlation: 4.
Edge enhancement:4.
Compression Curve: 4.
Post-processing: 8.
100 frames permanent image storage.
Disk management.
General Measurement: multi-electronic-rule to measure distance, circumference, area(trace method, ellipse method),volume (ellipse method), angle , histogram, profile , stenosis and curvature etc.
Standard configuration:
- Main unit: 1 pc
2. 10MHz mechanical sector B probe: 1 pc.
3. 10MHz A probe : 1 pc.
4. Network cable: 1pc
Optional configuration:
1. Large lithium battery 4400mAh
2. Trolley
3. Ethernet switch
4. Battery charger
5. Foot switch
