Сияющий нагреватель для младенцев
| Параметры продукта | |
| Марка: | YSENMED |
| MOQ: | 1 |
| Упаковка: | Картонная упаковка |
| Доставить из: | Guangzhou |
| Время выполнения заказа: | 1-3 дня |
| Настройка: | Yes |
Сияющий нагреватель для младенцев
STANDARD COMPOSITION:
● Microcontroller control open type radiant warmer with manual and servo system
● Display skin set facility, skin observed temperature in ºC and heat power separately
● User friendly soft touch panel large and bright LED Display
● Ceramic infrared heating element for effective warming
● Audible and visual alarm facility for overheating beyond set temperature range,
probe failure, power failure, system failure and heater failure
● Warmer will be sense the skin probe failure and cut off the heater
● Warmer head will rotate and swivel in different direction
● Inbuilt battery back- up during power failure
● Keyboard locking facility to avoid unwanted user modification of the set parameter.
● Height of the warmer will adjustable
● Control panel will liquid proof and allow easy and hygienic disinfection
● Intelligent alarms for patient safety
● Large mattress, drop down side panels for easy access to new-born
● Examination lamps for easy observation of new-born
TECHNICAL SPECIFICATIONS:
● Observation Light : 1000 Lux
● Color Temperature range : 3700k to 5100k
● Patient control ( baby mode ) : 34°C to 37.5°C in increments 0.1°C ( 95°F to 99.5°F )
● Manual mode adjust heater output : 10 – 100% with 5% increment, auditory and visual alarm will give every 15 min.
● Temperature measurement accuracy: ± 0.3°C, resolution: ± 0.1°C, probe accuracy: ± 0.1°C
● Warmer have with bassinet trolley. Mattress foam density 25kg/cm³, transparent collapsible side wall, easy detachable for cleaning, mattress size : 20” x 28 ”
● Size of drop down 5” (±1” ) mattress surface, 6mm thick, clear and transparent.
● Bed height about 80 ~ 100cm from the floor and 80 ~ 90cm from the heat source.
● The baby bed is crevice free for ease of cleaning, infection control and mattress used to be
biocompatible material.
● Heater Element : 600 watts
● Heater will cut off , if the maximum irradiance at any point of the mattress area exceeds a total irradiance level of 10mw/cm² or above 60% of the heater output ( between 10 to 30 min)
● Bed tilt mechanism : -10-15°
● Skin temperature probe size : ≤ 10mm dia 3~ 4mm thick ( biocompatible), pliable probe wire and non-stiff
● Castor wheels 2 are lockable
● Ambient temperature : 10-40°C
● Relative Humidity : 15 - 90%
● Power supply : 220-240VAC, 50Hz
ACCESSORIES:
1.Mattress-1 No.
2.IV pole-1 No.
3.Skin Probe-1 No.
4.X-ray cassette tray-1 No
5.Operational and service manual – 1 set each
